Difference between revisions of "Satellite Autonomous Systems"

From MIT Technology Roadmapping
Jump to navigation Jump to search
 
(82 intermediate revisions by the same user not shown)
Line 1: Line 1:
Roadmap Creators: Dansil Green | Rashmi Ravishankar
Time Stamp: 5 December 2023
=Satellite Autonomous Systems for Rendezvous and Proximity Operations=
=Satellite Autonomous Systems for Rendezvous and Proximity Operations=


==Roadmap Overview==
==Roadmap Overview==


There is a need for satellites designed to perform a wide range of tasks in space without constant human intervention, including navigation, data collection, decision-making, rendezvous, proximity operations, docking, debris disposal, and servicing. We present a strategic plan supported by a technological pathway for the development and deployment of satellites capable of operating autonomously in space, focusing on autonomous systems for Rendezvous and Proximity Operations (RPO).
[[File:RPO_Ex.jpeg|thumb|right|250px|SpaceX Dragon Capsule docking with the International Space Station]] There is a need for satellites designed to perform a wide range of tasks in space without constant human intervention, including navigation, data collection, decision-making, rendezvous, proximity operations, docking, debris disposal, and servicing. We present a strategic plan supported by a technological pathway for the development and deployment of satellites capable of operating autonomously in space, focusing in on autonomous systems for Rendezvous and Proximity Operations (RPO).


Autonomous satellites will be equipped with advanced onboard systems that allow them to navigate and adjust their orbits, avoiding collisions with other space objects or debris, enhancing the efficacy of space missions. Advanced onboard processing is needed for real time decision making that allows for responses to dynamic situations and course correction, particularly in RPO. The ability to communicate and make decisions autonomously with information shared between satellites is valuable for many mission types including In-Space Servicing, Assembly, and Manufacturing (ISAM), Active Debris Removal (ADR), and constellations of satellites working together in formation flight.
Autonomous satellites will be equipped with advanced onboard systems that allow them to navigate and adjust their orbits, avoiding collisions with other space objects or debris, enhancing the efficacy of space missions. Advanced onboard processing is needed for real time decision making that allows for responses to dynamic situations and course correction, particularly in RPO. The ability to communicate and make decisions autonomously with information shared between satellites is valuable for many mission types including In-Space Servicing, Assembly, and Manufacturing (ISAM), Active Debris Removal (ADR), and constellations of satellites working together in formation flight [1].


==DSM Allocation==
==DSM Allocation==
[[File:OPM_model.png|1000px]]
[[File:OPM_model.png|800px]] [[File:2RPO_Tree.png|400px]]
 
==Roadmap Model using OPM==


==OPM==
[[File:SAS_SD_full.jpg|1200px]]


[[File:SD_full.png]]
[[File:SAS_SD_words.png|550px]]


[[File:SD1_Chaser.png]] [[File:SD2_Maneuvering.png]]
[[File:SD1_Chaser.png]] [[File:SD2_Maneuvering.png]]
Line 20: Line 26:
Autonomous systems for Rendezvous and Proximity Operations (RPO) can be utilized for a number of spacecraft missions, including inspection, capture, docking, servicing, formation flight, etc. Given this variety, it is difficult to standardize FOMs among all mission types. Some proposed FOMs are identified in the table below.
Autonomous systems for Rendezvous and Proximity Operations (RPO) can be utilized for a number of spacecraft missions, including inspection, capture, docking, servicing, formation flight, etc. Given this variety, it is difficult to standardize FOMs among all mission types. Some proposed FOMs are identified in the table below.


[[File:RPO_FOM_Table.png|750px]]
[[File:RPO_FOM_Table.png|center|750px]]


===Proposed Safety-Related FOMS===
===Proposed Safety-Related FOMS===
A survey of missions which included elements of RPO published in 2018 and performed by the University of Southern California’s (USC) Space Engineering Research Center (SERC) in association with the Consortium for Execution of Rendezvous and Servicing Operations (CONFERS) sought to identify potential attributes for comparison in order to define safe standards for RPO [1]. The survey found that there were only a few comparable attributes with no discernable pattern other than proposed ‘safety nets’ around targets during approach, which could vary widely among mission types. However, there was agreement that these systems should perform accurately while applying the principle of ‘do not harm’ to the space environment by preventing debris creating collisions. The SERC therefore proposed three metrics to address safety within the final approach of RPO: Contact Velocity, Remote Influence, and Control Accuracy. These metrics are unitless ratios and therefore independent of scale and are assumed to be applied to two spacecraft (a chaser and target); so they are not necessarily applicable to RPO with pieces of debris.
A survey of missions which included elements of RPO published in 2018 and performed by the University of Southern California’s (USC) Space Engineering Research Center (SERC) in association with the Consortium for Execution of Rendezvous and Servicing Operations (CONFERS) sought to identify potential attributes for comparison in order to define safe standards for RPO [2]. The survey found that there were only a few comparable attributes with no discernable pattern other than proposed ‘safety nets’ around targets during approach, which could vary widely among mission types. However, there was agreement that these systems should perform accurately while applying the principle of ‘do not harm’ to the space environment by preventing debris creating collisions. The SERC therefore proposed three metrics to address safety within the final approach of RPO: Contact Velocity, Remote Influence, and Control Accuracy. These metrics are unitless ratios and therefore independent of scale and are assumed to be applied to two spacecraft (a chaser and target); so they are not necessarily applicable to RPO with pieces of debris.


Contact Velocity is based on the practice of maintaining a relative velocity to the target such that if no braking maneuver is executed, the collision of the spacecraft will not result in separable debris from either. It is defined as the ratio of the projected velocity of final approach over the maximum permissible velocity to prevent debris creation, accounting for the stress and momentum of the spacecraft. A CV < 1 is at low risk of critical damage while a CV > 1 is at high risk.
Contact Velocity is based on the practice of maintaining a relative velocity to the target such that if no braking maneuver is executed, the collision of the spacecraft will not result in separable debris from either. It is defined as the ratio of the projected velocity of final approach over the maximum permissible velocity to prevent debris creation, accounting for the stress and momentum of the spacecraft. A CV < 1 is at low risk of critical damage while a CV > 1 is at high risk.
Line 37: Line 43:
[[File:CA_Formula.png|center]]
[[File:CA_Formula.png|center]]


Using the results from the survey, the SERC calculated these metrics for three example RPO missions shown in the table below [2]. Contact Velocity was calculated for three additional missions in a subsequent paper (Note: RESTORE-L is now the OSAM-1 mission).
Using the results from the survey, the SERC calculated these metrics for three example RPO missions shown in the table below [2,3]. Contact Velocity was calculated for three additional missions in a subsequent paper (Note: RESTORE-L is now the OSAM-1 mission) [3].


[[File:SERC_FOMs_2.png]]
[[File:SERC_FOMs_2.png|center]]


When graphed, these FOMs exhibit interesting characteristics related to technological development. The theoretical limit for each of them is 0 since this when no potential inadvertent force or contact would occur. Looking further at the Control Accuracy FOM, this does seem to exhibit a potential part of an inverted S-Curve, though there are too few data points to confirm. Based on this, however, we may estimate that the technology is currently in the slowing to stagnation phase of the technology development. We can also perhaps see a partial of an inverted S-Curve when looking at the Contact Velocity FOM, though it is thrown off by the newer missions. This could be a result though of the different risk tolerances of the mission types (human carrying vs. not) that lead to certain design choices which influence the FOM.  
When graphed, these FOMs exhibit interesting characteristics related to technological development. The theoretical limit for each of them is 0 since this when no potential inadvertent force or contact would occur. Looking further at the Control Accuracy FOM, this does seem to exhibit a potential part of an inverted S-Curve, though there are too few data points to confirm. Based on this, however, we may estimate that the technology is currently in the slowing to stagnation phase of the technology development. We can also perhaps see a partial of an inverted S-Curve when looking at the Contact Velocity FOM, though it is thrown off by the newer missions. This could be a result though of the different risk tolerances of the mission types (human carrying vs. not, greater autonomy, etc.) that lead to certain design choices which influence the FOM.  


[[File:CV_Graph.png|425px]] [[File:RI_Graph.png|425px]] [[File:CA_Graph.png|425px]]  
[[File:CV_Graph.png|425px]] [[File:RI_Graph.png|425px]] [[File:CA_Graph.png|425px]]  
Line 47: Line 53:
When Contact Velocity vs. Control Accuracy is graphed, one can see a possible Pareto Shift Model, with each newer system shifting lower.
When Contact Velocity vs. Control Accuracy is graphed, one can see a possible Pareto Shift Model, with each newer system shifting lower.


[[File:CV_vs_CA_Graph.png|425px]]
[[File:CV_vs_CA_Graph.png|center|425px]]


In theory, there is a physical limit to the positional accuracy for autonomous systems using optical sensors, and this limit is mainly determined by the laws of physics, particularly the diffraction limit. The diffraction limit defines the smallest resolvable details or features that an optical or radio system can distinguish. This limit is a fundamental constraint on all optical systems, including space cameras, telescopes, and sensors.
===Positional Accuracy===
In theory, there is a physical limit to the positional accuracy for autonomous systems using optical sensors, and this limit is mainly determined by the laws of physics, particularly the diffraction limit [4]. The diffraction limit defines the smallest resolvable details or features that an optical or radio system can distinguish. This limit is a fundamental constraint on all optical systems, including space cameras, telescopes, and sensors.


The diffraction limit, which defines the minimum resolvable angle (&theta;) for a circular aperture, is given by the formula:
The diffraction limit, which defines the minimum resolvable angle (&theta;) for a circular aperture, is given by the formula:
Line 63: Line 70:


==Alignment with Company Strategic Drivers==
==Alignment with Company Strategic Drivers==
Two strategic drivers necessary for producing an effective and trustworthy satellite autonomous system for RPO are detailed below.
[[File:SAS_StrategyAlignment.png|center|650px]]
Strategic Driver #2 is well on it's way of being achieved. Missions with at least one of the proposed safety-related FOMs <0.01 have been demonstrated as shown by the SpaceX Dragon capsule [2]. While future missions may temporarily increase FOMs as new aspects, like greater autonomy and ISAM elements, are tested, the overall downward trend is expected to continue [3].
Strategic Driver #1 has longer to go in developing an autonomous system for RPO completely free of human interaction. The failure of NASA's DART mission as described in Section 1.9: R&D Portfolio has unfortunately likely contributed to the slow development of the field [1]. However, with the recent boom in space investment and interest in expanded ISAM and space logistics activities, autonomous systems for RPO are rapidly maturing. Current systems reside in the 3-4 Levels of Automation. Development will continue first toward Level 4-High Automation with cooperative targets like other spacecraft and the most toward non-cooperative targets like debris. Moving to Level 5-Full Automation will rely on continued successful demonstration of Level 4 and trust in the safety of the systems as given by Strategic Driver #2.


==Positioning of Company vs. Competition==
==Positioning of Company vs. Competition==
There are many established aerospace companies that have equipped their satellites with autonomous systems for different phases of RPO and are continuing the development of these types of systems into the future. Some example companies are shown in the table below. Northrop Grumman is the leader of this group in relation to autonomous RPO as they own the subsidiary, Space Logistics, which develops the Mission Extension Vehicle (MEV) that requires these capabilities as shown in Section 1.4.1: Proposed Safety-Related FOMs. Northrop Grumman is also looking to implement further autonomous RPO capability in its Cygnus spacecraft as detailed in Section 1.8: Financial Model. Many new competitors have also entered the field in the last decade looking to provide ISAM and space logistics capabilities that will require autonomous RPO. While most of these are still in the demonstration stage, they may overtake the bigger players in this field due to their cutting-edge technologies and agile development abilities.
[[File:Sat_Competition.png|center|650px]]
<gallery mode="packed" heights=150px>
File:NG_MilCom.png|(Northrop Grumman Military ComSat)
File:LM_400.png|(Lockheed Martin 400)
File:Boeing_702.png|(Boeing 702)
File:Thales_SES22.png|(Thales SES-22)
File:Maxar_Worldview.png|(Maxar Worldview)
</gallery>


==Technical Model==
==Technical Model==
===Contact Velocity===
The safety of autonomous systems for RPO can be modeled and measured in a variety of ways. One potential model and metric for this is that of Contact Velocity. Contact Velocity is based on the practice of maintaining a relative velocity to the target such that if no braking maneuver is executed, the collision of the chaser spacecraft with the target will not result in separable debris from either. As seen in the equation below, it is defined as the ratio of the projected velocity of final approach over the maximum permissible velocity to prevent debris creation. A CV < 1 is at low risk of critical damage while a CV > 1 is at high risk.
[[File:CV_Formula.png|center]]
This maximum permissible approach velocity can be found by modeling the characteristics of the chaser and target as described below, taking into account the mass of both spacecraft, the material properties of the target, potential impact area of the chaser, estimated impulse time, a Coefficient of Restitution (CR) based on material malleability, and a Factor of Safety (FS).
[[File:CV_Model.png|center]]
The normalized tornado chart for this sensitivity analysis is shown below. Three of the variables are positive and two are negative. This makes sense because as the impact pressure the spacecraft can withstand and the area over which it occurs and the time goes up, the greater velocity the impact can be at. Whereas, as the spacecraft get closer in size to each other (the mass ratio goes up) and the CR goes up, meaning the material is more rigid, the max velocity it could take goes down. As shown in the chart, the CR is less sensitive than the rest of the variables.
[[File:CV_SA.png|center|500px]]
===Positional Accuracy===
The potential positional accuracy of an autonomous system for RPO can be modeled using the diffraction limit, which defines the minimum resolvable angle for a circular aperture with the wavelength of light and the diameter of the aperture. This times the distance between objects gives the positional accuracy.
[[File:PA_Model.png|center]]
A sensitivity analysis was performed for this FOM in the same manner as discussed above. The normalized tornado chart is shown below. No variable is shown to be more sensitive than another.
[[File:PA_SA.png|center|500px]]
==Financial Model==
[[File:Cygnus_Spacecraft.jpg|thumb|right|Northrop Grumman Cygnus Capsule]] In August of 2023, Northrop Grumman announced its intentions to implement autonomous docking capability to its Cygnus spacecraft used to resupply the International Space Space (ISS) [5,6]. Unlike the SpaceX Dragon 2 capsule which has active autonomous docking capability, the Cygnus capsule still relies on the ISS's robotic arm, Canadarm2, to berth and dock. The Cygnus spacecraft was therefore chosen to perform a delta Net Present Value (NPV) Analysis on in order to understand the potential financial benefit of employing autonomous RPO technology.
===Baseline Cygnus Spacecraft===
Initial cost to develop the Cygnus spacecraft was $300M, however, most of this cost, $288M, was recouped through Research and Development (R&D) contracts with NASA. The estimated price per mission in 2020 was $223M [7-10]. Using an profit margin of 20%, the estimated per unit cost is $178.4M. An NPV analysis as shown below was performed for a 10 year timeframe with a discount rate of 2% using two missions per year as has been historically seen for Cygnus ISS resupply missions. The total NPV for the baseline is $498M.
[[File:Cygnus_NPV_withoutRPO.png|center]]
===Cygnus Spacecraft with Autonomous RPO===
An NPV analysis was then performed for a Cygnus spacecraft with autonomous RPO capability. An estimated $50M in nonrecurring development costs would be required initially for this upgrade which would not be recouped from external R&D funding sources. This would also add an estimated $12M per unit cost to the Cygnus spacecraft, bringing the total per unit cost to $190M. However, Northrop Grumman could charge an estimated $250M then for the the upgraded Cygnus capsule. The NPV analysis shown below was performed for the same 10 year timeframe as the baseline with a discount rate of 2% using two missions per year. The total NPV for the Cygnus with autonomous RPO technology is $624M.
[[File:Cygnus_NPV_withRPO.png|center]]
===Financial Benefits===
The delta NPV between the baseline Cygnus spacecraft and the addition of autonomous RPO capability is positive $126M. This shows the financial benefit of implementing such technology. The current Cygnus design is also not conducive to some future commercial space station designs that do not include robotic arm technology. It is therefore in the best interest of the company to also utilize autonomous RPO technology in order to continue capturing market share.
==R&D Portfolio==
===NASA DART===
NASA’s Demonstration of Autonomous Rendezvous (DART) was one of the first demonstrator R&D projects aimed at proving technologies for fully autonomous rendezvous capability. The DART spacecraft was launched in 2005 from Vandenberg Air Force Base by a Pegasus launch vehicle. The project was started in 2001 as proposed by the Orbital Sciences Corporation and selected as a high-risk demonstration project by NASA. Proposed cost for the project was $47 million which would rise over the course of the mission to a total of $110 million [11]. The mission was composed of both the DART spacecraft and its target satellite, the Multiple Path Beyond Line of Sight Communication (MUBLCOM) satellite, a DARPA and Army sponsored spacecraft. The mission was split into four phases: Launch and Early Orbit, Rendezvous, Proximity Operations, Departure and Retirement. In the Launch and Early Orbit Phase, DART would be put in an initial parking orbit below the target satellite. It would then enter a phasing orbit to position it below and behind the target; this was intended to show that GPS receivers were accurate enough to place the spacecraft close enough together to begin Proximity Operations. In Proximity Operations, DART would get closer to that target and before close-range holds/inspection maneuvers. The DART spacecraft would then retire itself to a low orbit to deorbit in a short amount of time [11-16]. [[File:NASA_Dart.jpg|thumb|right|400px}NASA DART]]
Unfortunately, the DART demonstrator mission was a failure. During the Proximity Operations phase, DART used up too much propellant to maneuver due to incorrect navigation data. DART’s GPS receiver’s measured velocity was biased by 0.6 m/s and therefore caused the estimated and measured to differ enough that this triggered the autonomous software onboard to reset once every three minutes. This in turn caused the incorrect navigation which resulted in the firing of the thrusters too many times to correct course and depleted the propellant. Due to the navigation errors, the DART spacecraft also missed the hold for the switch to full use of the Advanced Video Guidance Sensor (AVGS) and continued on a course that resulted in it colliding with MUBLCOM. While the DART mission did fail, a number of lessons were learned from the endeavor. These were mostly in relation to lack of rigor in the Guidance, Navigation and Control (GNC) software development and testing process and recommendations for adequate documentation and simulations in order to implement fully autonomous RPO technology [11].
===DARPA Orbital Express===
[[File:DARPA_OrbitalExpress.jpg|thumb|left|400px|DARPA Orbital Express]] The Defense Advanced Research Projects Agency's (DARPA's) Orbital Express was a demonstration mission launched in 2007 which sought to validate autonomous RPO technology in relation to in-space servicing [1]. The Orbital Express mission consisted of two spacecraft including the Autonomous
Space Transfer and Robotic Orbiter (ASTRO) and the Next-generation Satellite/Commodity Spacecraft (NextSat/CSC). The mission objectives related to ISAM included hydrazine fuel transfer, battery replacement, and flight computer replacement. Unfortunately an anomaly in the onboard sensor computer caused the navigation system to reject new information resulting in poor relative position and attitude knowledge and requiring operator intervention. Orbital Express did perform autonomously portions of its tasking when given Authority to Proceed (ATP) by ground operators and demonstrated to the potential of in-space servicing capabilities.
===Space Tugs & Servicers===
[[File:Starfish_Otter.jpg|thumb|right|400px|Starfish Space Otter]] There are a number of companies in the NewSpace economy that have emerged in recent years to provide in-space services to other spacecraft users. These include companies offering space tug spacecraft designed to attach to another spacecraft and carry it to a different orbit or disposal point, as well as companies offering spacecraft capable of refueling, repairing, or upgrading other spacecraft. Demonstrations of these technologies are currently in work, such as Starfish Space's Otter, Momentus' Vigoride, D-Orbit's ION, Astroscale's ELSA-d, Orbit Fab, and Space Logistics' MEV. Most of these are using conditional autonomous RPO designs with plans to move to more fully autonomous operations in the future as they scale.
===Needed Future Missions===
A number of R&D missions are still required in order to implement autonomous RPO technology aligned with the strategic drivers into the greater space ecosystem. To date, most spacecraft still operate in Level 3 - Conditional Autonomy with autonomous operations through rendezvous but most proximity and docking operations still human controlled or closely monitored. Another mission like NASA's DART should be planned to demonstrate Level 4 and 5 autonomy for RPO. This can first be done with a cooperative target. Then autonomous RPO at full autonomy can be shown with a passive/non-cooperative target. Future R&D projects should also align with the safety FOMs proposed to show safe and trusted performance of autonomous RPO technology. A demonstrator mission where two autonomous RPO are occurring at the same time should also be planned to ensure scalability of the capability.


==Key Publications and Patents==
==Key Publications and Patents==


===Publications===
===Publications===
Historically in the US, RPO has been completed manually by astronauts with the assistance of technology. In the earliest days, astronauts utilized line-of-sight guidance techniques to complete RPO maneuvers with radar ranging. This was studied in Edwin ‘Buzz’ Aldrin’s 1963 MIT Dissertation, “Line-of-Sight Guidance Techniques for Manned Orbital Rendezvous” [4]. His Dissertation explored the inertial rotation of line-of-sight through rendezvous trajectories with only angular motion tracking information of a target spacecraft known without ranging. Buzz applied the technique in simulation of the Gemini rendezvous mission as well. He also noted that the “important question” of autonomy “concerning the proper allocation of the human resources to either direct participation controlling or a mere monitoring role in the overall mission is as yet not completely settled.”
Historically in the US, RPO has been completed manually by astronauts with the assistance of technology. In the earliest days, astronauts utilized line-of-sight guidance techniques to complete RPO maneuvers with radar ranging. This was studied in Edwin ‘Buzz’ Aldrin’s 1963 MIT Dissertation, “Line-of-Sight Guidance Techniques for Manned Orbital Rendezvous” [17]. His Dissertation explored the inertial rotation of line-of-sight through rendezvous trajectories with only angular motion tracking information of a target spacecraft known without ranging. Buzz applied the technique in simulation of the Gemini rendezvous mission as well. He also noted that the “important question” of autonomy “concerning the proper allocation of the human resources to either direct participation controlling or a mere monitoring role in the overall mission is as yet not completely settled.”


In “Navigating the Road to Autonomous Orbital Rendezvous” (2007), David Woffinden and David Geller of Utah State University explore the birth and progress of autonomous RPO [5]. It can be seen that essentially from the start, the US and Russian space programs took two different approaches to orbital rendezvous operations. The US focused on manned operations that reduced complexity and allowed for flexibility, but made each mission unique and required intensive training. The Russians, on the other hand, focused on more automated operations with astronauts in a monitoring and override role. This increased development time and cost initially, but standardized systems between missions and reduced recurring engineering work. The paper argues that the Russian’s focus on automated RPO was likely a consequence of the military’s influence in their space program and push for automatization in order to reduce redesign between manned and reconnaissance missions. The differences between national approaches are seen in the subsequent design and legacy of RPO systems as outlined by Woffinden and Geller. The paper also explores the idea that the autonomous RPO systems of the future must meet new demands that are now possible due to the development of technology and techniques across the past half century of space exploration and orbital rendezvous operations.
In “Navigating the Road to Autonomous Orbital Rendezvous” (2007), David Woffinden and David Geller of Utah State University explore the birth and progress of autonomous RPO [18]. It can be seen that essentially from the start, the US and Russian space programs took two different approaches to orbital rendezvous operations. The US focused on manned operations that reduced complexity and allowed for flexibility, but made each mission unique and required intensive training. The Russians, on the other hand, focused on more automated operations with astronauts in a monitoring and override role. This increased development time and cost initially, but standardized systems between missions and reduced recurring engineering work. The paper argues that the Russian’s focus on automated RPO was likely a consequence of the military’s influence in their space program and push for automatization in order to reduce redesign between manned and reconnaissance missions. The differences between national approaches are seen in the subsequent design and legacy of RPO systems as outlined by Woffinden and Geller. The paper also explores the idea that the autonomous RPO systems of the future must meet new demands that are now possible due to the development of technology and techniques across the past half century of space exploration and orbital rendezvous operations.


===Patents===
===Patents===
US Patent 5,951,609 “Method and System for Autonomous Spacecraft Control”, dated Sep. 14th, 1999 by Hanson et. al. of TRW Inc., outlines a system for autonomous spacecraft control by managing onboard systems, monitoring performance with optimization, and fault detection with adaptive fault recovery. A proposed “mission manager module” is utilized to analyze incoming mission objective commands and verify resourcing. These mission objective commands are then translated by a “command processor” into lower level command sequences for the subsystems to perform. [[File:Autonomous_Sat.png|right|350px]]
Patents were found through the US Patent and Trademark Office’s online Patent Public Search tool. A search was performed with combinations of key terms using the AND operator: satellite/spacecraft/space+rendezvous, satellite/spacecraft/space+autonomous/autonomy, satellite/spacecraft/space+proximity, satellite/spacecraft/space+docking. Results were categorized according to five areas: Satellite Autonomy, Satellite Navigation, Satellite Maneuvering, Rendezvous, and Docking/Capture. The CPC classification is 244 for Aeronautics and Astronautics, 701 for Vehicles, Navigation, and Relative Location, and 382 for Image Analysis.


[[File:Target_Reflec.png|left|350px]] US Patent 5,734,736 “Autonomous Rendezvous and Docking System and Method Therefor”, dated Mar. 31st, 1998 by Palmer et. al. of TRW Inc., characterizes a system for performing autonomous rendezvous and docking using reflective targets to determine relative position between a chaser and target spacecraft. A reflective target is attached to the target spacecraft which reflects radiation to a sensor, receiving radiation of “a first in band wavelength” and illuminating the target with “a second out of band wavelength”. The sensor system can distinguish between the two and produce a difference image which can discriminate the reflective target position from spurious light based on known target “intensity, size, shape, and location”. This can then be utilized to produce a state vector of the target spacecraft relative to the chaser.
[[File:Autonomous_Sat.png|thumb|right|400px|From US Patent 5,951,609 “Method and System for Autonomous Spacecraft Control”]] US Patent 5,951,609 “Method and System for Autonomous Spacecraft Control”, dated Sep. 14th, 1999 by Hanson et. al. of TRW Inc., outlines a system for autonomous spacecraft control by managing onboard systems, monitoring performance with optimization, and fault detection with adaptive fault recovery [19]. A proposed “mission manager module” is utilized to analyze incoming mission objective commands and verify resourcing. These mission objective commands are then translated by a “command processor” into lower level command sequences for the subsystems to perform.


US Patent 2002/0035419 A1 “Autonomous Navigation, Guidance and Control using LDRI”, dated Mar. 21st, 2002 by Ching-Fang Lin, describes a process for docking and formation flight utilizing a Laser Dynamic Range Imager (LDRI). The proposed system eliminates the need for unique targets on spacecraft, “which are highly dependent on illumination and orientation.The LDRI avoids the illumination problem by using a continuous wave laser radar. Range is found through the phase shift between incident and reflected laser beams coming from each pixel. The target’s motion can then be calculated using the light intensity and range images. The relative position and attitude error is then used to produce control commands for rendezvous. A similar system was used by the US Space Shuttle program. [[File:LDRI.png|right|400px]]
[[File:Target_Reflec.png|thumb|left|450px|From US Patent 5,734,736 “Autonomous Rendezvous and Docking System and Method Therefor”]] US Patent 5,734,736 “Autonomous Rendezvous and Docking System and Method Therefor”, dated Mar. 31st, 1998 by Palmer et. al. of TRW Inc., characterizes a system for performing autonomous rendezvous and docking using reflective targets to determine relative position between a chaser and target spacecraft [20]. A reflective target is attached to the target spacecraft which reflects radiation to a sensor, receiving radiation of “a first in band wavelength” and illuminating the target with “a second out of band wavelength”. The sensor system can distinguish between the two and produce a difference image which can discriminate the reflective target position from spurious light based on known target “intensity, size, shape, and location”. This can then be utilized to produce a state vector of the target spacecraft relative to the chaser.


==Financial Model (TBD)==
US Patent 2002/0035419 A1 “Autonomous Navigation, Guidance and Control using LDRI”, dated Mar. 21st, 2002 by Ching-Fang Lin, describes a process for docking and formation flight utilizing a Laser Dynamic Range Imager (LDRI) [21]. The proposed system eliminates the need for unique targets on spacecraft, “which are highly dependent on illumination and orientation.” The LDRI avoids the illumination problem by using a continuous wave laser radar. Range is found through the phase shift between incident and reflected laser beams coming from each pixel. The target’s motion can then be calculated using the light intensity and range images. The relative position and attitude error is then used to produce control commands for rendezvous. A similar system was used by the US Space Shuttle program.
[[File:LDRI.png|thumb|center|550px|From US Patent 2002/0035419 A1 “Autonomous Navigation, Guidance and Control using LDRI”]]


==R&D Portfolio (TBD)==
==Technology Strategy Statement==


==Technology Strategy Statement (TBD)==
===Our target is to reach a fully autonomous system for satellite RPO that is safe and scalable. As stated in previous sections, the first step will be getting to Level 4-High Autonomation with autonomy throughout all mission phases and human control only required in emergency scenarios. This will first be shown with cooperative and then non-cooperative targets. Once this is safely and effectively demonstrated, then Level 5-Full Automation can be demonstrated and the system can be scaled.===


==Roadmap Maturity Assessment (TBD)==
[[File:RPO_SwooshChart.png|center|600px]]


==References==
==References==
[1] https://www.isi.edu/sites/default/files/centers/serc/CONFERS_IAC_Paper_PUBLISH.PDF
[1] "Getting In Your Space: Learning from Past Rendezvous And Proximity Operations". The Aerospace Corporation. 2018. https://aerospace.org/sites/default/files/2018-05/GettingInYourSpace.pdf
[2] https://www.isi.edu/sites/default/files/users/barnhart/INITIAL%20SAFETY%20POSTURE%20INVESTIGATIONS%20FOR%20EARTH%20REGIME%20RENDEZVOUS%20AND%20PROXIMITY%20OPERATIONS%20-%20IAASS%202019.pdf
 
[3] https://pressbooks.online.ucf.edu/phy2053bc/chapter/limits-of-resolution-the-rayleigh-criterion/
[2]
[4] https://dspace.mit.edu/handle/1721.1/12652  
"Using Historical Practices to Develop Safety Standards for Cooperative On Orbit Rendezvous and Proximity Operations". International Astronautical Congress. 2018. https://www.isi.edu/sites/default/files/centers/serc/CONFERS_IAC_Paper_PUBLISH.PDF
[5] https://arc.aiaa.org/doi/pdf/10.2514/1.30734?casa_token=A5dxnyeh6v4AAAAA:5ad2z08Y35KCEuGKZj9tKGc_X_FqBx4EuofPcEHcaztVvbVrCP9G1A7x6Za06c3HW0XDaru59EFcOw
 
[6] https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5951609  
[3] "INITIAL SAFETY POSTURE INVESTIGATIONS FOR EARTH REGIME RENDEZVOUS
[7] https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5734736  
AND PROXIMITY OPERATIONS". International Association for the Advancement of Space Safety. 2019. https://www.isi.edu/sites/default/files/users/barnhart/INITIAL%20SAFETY%20POSTURE%20INVESTIGATIONS%20FOR%20EARTH%20REGIME%20RENDEZVOUS%20AND%20PROXIMITY%20OPERATIONS%20-%20IAASS%202019.pdf
[8] https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/20020035419
 
[4] "Limits of Resolution: The Rayleigh Criterion". College Physics. 2016. https://pressbooks.online.ucf.edu/phy2053bc/chapter/limits-of-resolution-the-rayleigh-criterion/
 
[5] https://en.wikipedia.org/wiki/Commercial_Resupply_Services
 
[6] "NORTHROP GRUMMAN ANNOUNCES CYGNUS SPACECRAFT UPGRADES". The Launch Pad News. 2023. https://tlpnetwork.com/news/2023/08/northrop-grumman-announces-cygnus-spacecraft-upgrades
 
[7] "SpaceX price hikes will make ISS cargo missions more costly". engadget. 2018. https://www.engadget.com/2018-04-27-spacex-price-hikes-iss-resupply-costs.html
 
[8] "NASA will pay more for less ISS cargo under new commercial contracts". SpaceNews. 2018. https://spacenews.com/nasa-will-pay-more-for-less-iss-cargo-under-new-commercial-contracts/
 
[9]
"Cygnus cargo vehicle gearing up for debut flight". Spaceflight Now. 2013. https://spaceflightnow.com/antares/cots1/130904frr/#:~:text=The%20development%20of%20the%20Cygnus,of%20Orbital's%20advanced%20programs%20group.
 
[10] "Discount History". White House. 2020. https://www.whitehouse.gov/wp-content/uploads/2020/12/discount-history.pdf
 
[11] "Overview of the DART Mishap Investigation Results". 2006. https://www.nasa.gov/wp-content/uploads/2015/01/148072main_dart_mishap_overview.pdf
 
[12] "Demonstration of Autonomous Rendezvous Technology (DART)
Project Summary". SPIE's Space Systems Technology and Operations Conference. 2003. https://ntrs.nasa.gov/api/citations/20030062183/downloads/20030062183.pdf
 
[13] "DART". Gunter's Space Page. 2003. https://space.skyrocket.de/doc_sdat/dart.htm
 
[14] "DART (Demonstration for Autonomous Rendezvous Technology)". esa eoPortal. 2012. https://www.eoportal.org/satellite-missions/dart-rendezvous#dart-demonstration-for-autonomous-rendezvous-technology
 
[15] "Orbital's Dart Vehicle Arrives at Vandenberg Air Force Base for Prelaunch Integration and Testing". Northrop Grumman. 2004. https://news.northropgrumman.com/news/releases/orbital-s-dart-vehicle-arrives-at-vandenberg-air-force-base-for-prelaunch-integration-and-testing
 
[16] "Multiple path beyond-line-of-sight communications (MUBLCOM)". IEEE. 1998. https://ieeexplore.ieee.org/document/722540
 
[17] "Line-of-sight guidance techniques for manned orbital rendezvous". Aldrin, Buzz. MIT. 1963. https://dspace.mit.edu/handle/1721.1/12652  
 
[18] "Navigating the Road to Autonomous Orbital Rendezvous" Woffinden, David; Geller, David. Utah State University. 2007. https://arc.aiaa.org/doi/pdf/10.2514/1.30734?casa_token=A5dxnyeh6v4AAAAA:5ad2z08Y35KCEuGKZj9tKGc_X_FqBx4EuofPcEHcaztVvbVrCP9G1A7x6Za06c3HW0XDaru59EFcOw
 
[19] "US Patent: Method and System for Autonomous Spacecraft Control". Hanson et al. TRW Inc. 1999. https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5951609  
 
[20] "US Patent: Autonomous Rendezvous and Docking System and Method Therefor" Palmer et al. TRW Inc. 1998. https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5734736  
 
[21] "US Patent: Autonomous Navigation, Guidance and Control using LDRI". Lin. https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/20020035419
 
[22] "The 6 Levels of Vehicle Autonomy Explained". synopsis. https://www.synopsys.com/automotive/autonomous-driving-levels.html

Latest revision as of 19:23, 5 December 2023

Roadmap Creators: Dansil Green | Rashmi Ravishankar

Time Stamp: 5 December 2023

Satellite Autonomous Systems for Rendezvous and Proximity Operations

Roadmap Overview

SpaceX Dragon Capsule docking with the International Space Station

There is a need for satellites designed to perform a wide range of tasks in space without constant human intervention, including navigation, data collection, decision-making, rendezvous, proximity operations, docking, debris disposal, and servicing. We present a strategic plan supported by a technological pathway for the development and deployment of satellites capable of operating autonomously in space, focusing in on autonomous systems for Rendezvous and Proximity Operations (RPO).

Autonomous satellites will be equipped with advanced onboard systems that allow them to navigate and adjust their orbits, avoiding collisions with other space objects or debris, enhancing the efficacy of space missions. Advanced onboard processing is needed for real time decision making that allows for responses to dynamic situations and course correction, particularly in RPO. The ability to communicate and make decisions autonomously with information shared between satellites is valuable for many mission types including In-Space Servicing, Assembly, and Manufacturing (ISAM), Active Debris Removal (ADR), and constellations of satellites working together in formation flight [1].

DSM Allocation

OPM model.png 2RPO Tree.png

Roadmap Model using OPM

SAS SD full.jpg

SAS SD words.png

SD1 Chaser.png SD2 Maneuvering.png

Figures of Merit (FOM)

Autonomous systems for Rendezvous and Proximity Operations (RPO) can be utilized for a number of spacecraft missions, including inspection, capture, docking, servicing, formation flight, etc. Given this variety, it is difficult to standardize FOMs among all mission types. Some proposed FOMs are identified in the table below.

RPO FOM Table.png

Proposed Safety-Related FOMS

A survey of missions which included elements of RPO published in 2018 and performed by the University of Southern California’s (USC) Space Engineering Research Center (SERC) in association with the Consortium for Execution of Rendezvous and Servicing Operations (CONFERS) sought to identify potential attributes for comparison in order to define safe standards for RPO [2]. The survey found that there were only a few comparable attributes with no discernable pattern other than proposed ‘safety nets’ around targets during approach, which could vary widely among mission types. However, there was agreement that these systems should perform accurately while applying the principle of ‘do not harm’ to the space environment by preventing debris creating collisions. The SERC therefore proposed three metrics to address safety within the final approach of RPO: Contact Velocity, Remote Influence, and Control Accuracy. These metrics are unitless ratios and therefore independent of scale and are assumed to be applied to two spacecraft (a chaser and target); so they are not necessarily applicable to RPO with pieces of debris.

Contact Velocity is based on the practice of maintaining a relative velocity to the target such that if no braking maneuver is executed, the collision of the spacecraft will not result in separable debris from either. It is defined as the ratio of the projected velocity of final approach over the maximum permissible velocity to prevent debris creation, accounting for the stress and momentum of the spacecraft. A CV < 1 is at low risk of critical damage while a CV > 1 is at high risk.

CV Formula.png

Remote Influence is based on the practice of maintaining a distance between the spacecraft and orientation such that forces from the chaser spacecraft (like thruster plume) don’t exert unintended torque on the target. It is defined as the ratio of the projected angular velocity from plume impingement to the maximum permissible angular velocity. An RI < 1 is not at risk of loss of target control while RI > 1 is at risk.

RI Formula.png

Control Accuracy is mainly related to mission types where connection between spacecraft is intended and is based on the practice of maintaining control of the chaser such that the worst-case offset error does not exceed the Effective Capture Distance (ECD) of the chaser’s contact/capture mechanism. It is defined as the ratio of the Maximum Capture Offset (MCO) to the ECD. A CA < 1 is at low risk of not connecting while CA > 1 is at high risk.

CA Formula.png

Using the results from the survey, the SERC calculated these metrics for three example RPO missions shown in the table below [2,3]. Contact Velocity was calculated for three additional missions in a subsequent paper (Note: RESTORE-L is now the OSAM-1 mission) [3].

SERC FOMs 2.png

When graphed, these FOMs exhibit interesting characteristics related to technological development. The theoretical limit for each of them is 0 since this when no potential inadvertent force or contact would occur. Looking further at the Control Accuracy FOM, this does seem to exhibit a potential part of an inverted S-Curve, though there are too few data points to confirm. Based on this, however, we may estimate that the technology is currently in the slowing to stagnation phase of the technology development. We can also perhaps see a partial of an inverted S-Curve when looking at the Contact Velocity FOM, though it is thrown off by the newer missions. This could be a result though of the different risk tolerances of the mission types (human carrying vs. not, greater autonomy, etc.) that lead to certain design choices which influence the FOM.

CV Graph.png RI Graph.png CA Graph.png

When Contact Velocity vs. Control Accuracy is graphed, one can see a possible Pareto Shift Model, with each newer system shifting lower.

CV vs CA Graph.png

Positional Accuracy

In theory, there is a physical limit to the positional accuracy for autonomous systems using optical sensors, and this limit is mainly determined by the laws of physics, particularly the diffraction limit [4]. The diffraction limit defines the smallest resolvable details or features that an optical or radio system can distinguish. This limit is a fundamental constraint on all optical systems, including space cameras, telescopes, and sensors.

The diffraction limit, which defines the minimum resolvable angle (θ) for a circular aperture, is given by the formula:

Diffraction Limit.png

To evaluate the theoretical limit to remotely sensed location (which affects our FOM of accuracy), let's assume we have a radar system operating at a wavelength of 1 centimeter (0.01 meters) with an antenna size of 5 meters. If we are observing an object 10,000 kilometers away using a radar system with a specific wavelength and antenna size, we can use this formula to calculate the angular resolution. Using the formula:

Diffraction Limit Ex.png

This translates to an positional accuracy within .00244rad*10000km= 24.4km

Alignment with Company Strategic Drivers

Two strategic drivers necessary for producing an effective and trustworthy satellite autonomous system for RPO are detailed below.

SAS StrategyAlignment.png

Strategic Driver #2 is well on it's way of being achieved. Missions with at least one of the proposed safety-related FOMs <0.01 have been demonstrated as shown by the SpaceX Dragon capsule [2]. While future missions may temporarily increase FOMs as new aspects, like greater autonomy and ISAM elements, are tested, the overall downward trend is expected to continue [3].

Strategic Driver #1 has longer to go in developing an autonomous system for RPO completely free of human interaction. The failure of NASA's DART mission as described in Section 1.9: R&D Portfolio has unfortunately likely contributed to the slow development of the field [1]. However, with the recent boom in space investment and interest in expanded ISAM and space logistics activities, autonomous systems for RPO are rapidly maturing. Current systems reside in the 3-4 Levels of Automation. Development will continue first toward Level 4-High Automation with cooperative targets like other spacecraft and the most toward non-cooperative targets like debris. Moving to Level 5-Full Automation will rely on continued successful demonstration of Level 4 and trust in the safety of the systems as given by Strategic Driver #2.

Positioning of Company vs. Competition

There are many established aerospace companies that have equipped their satellites with autonomous systems for different phases of RPO and are continuing the development of these types of systems into the future. Some example companies are shown in the table below. Northrop Grumman is the leader of this group in relation to autonomous RPO as they own the subsidiary, Space Logistics, which develops the Mission Extension Vehicle (MEV) that requires these capabilities as shown in Section 1.4.1: Proposed Safety-Related FOMs. Northrop Grumman is also looking to implement further autonomous RPO capability in its Cygnus spacecraft as detailed in Section 1.8: Financial Model. Many new competitors have also entered the field in the last decade looking to provide ISAM and space logistics capabilities that will require autonomous RPO. While most of these are still in the demonstration stage, they may overtake the bigger players in this field due to their cutting-edge technologies and agile development abilities.

Sat Competition.png

Technical Model

Contact Velocity

The safety of autonomous systems for RPO can be modeled and measured in a variety of ways. One potential model and metric for this is that of Contact Velocity. Contact Velocity is based on the practice of maintaining a relative velocity to the target such that if no braking maneuver is executed, the collision of the chaser spacecraft with the target will not result in separable debris from either. As seen in the equation below, it is defined as the ratio of the projected velocity of final approach over the maximum permissible velocity to prevent debris creation. A CV < 1 is at low risk of critical damage while a CV > 1 is at high risk.

CV Formula.png

This maximum permissible approach velocity can be found by modeling the characteristics of the chaser and target as described below, taking into account the mass of both spacecraft, the material properties of the target, potential impact area of the chaser, estimated impulse time, a Coefficient of Restitution (CR) based on material malleability, and a Factor of Safety (FS).

CV Model.png

The normalized tornado chart for this sensitivity analysis is shown below. Three of the variables are positive and two are negative. This makes sense because as the impact pressure the spacecraft can withstand and the area over which it occurs and the time goes up, the greater velocity the impact can be at. Whereas, as the spacecraft get closer in size to each other (the mass ratio goes up) and the CR goes up, meaning the material is more rigid, the max velocity it could take goes down. As shown in the chart, the CR is less sensitive than the rest of the variables.

CV SA.png

Positional Accuracy

The potential positional accuracy of an autonomous system for RPO can be modeled using the diffraction limit, which defines the minimum resolvable angle for a circular aperture with the wavelength of light and the diameter of the aperture. This times the distance between objects gives the positional accuracy.

PA Model.png

A sensitivity analysis was performed for this FOM in the same manner as discussed above. The normalized tornado chart is shown below. No variable is shown to be more sensitive than another.

PA SA.png

Financial Model

Northrop Grumman Cygnus Capsule

In August of 2023, Northrop Grumman announced its intentions to implement autonomous docking capability to its Cygnus spacecraft used to resupply the International Space Space (ISS) [5,6]. Unlike the SpaceX Dragon 2 capsule which has active autonomous docking capability, the Cygnus capsule still relies on the ISS's robotic arm, Canadarm2, to berth and dock. The Cygnus spacecraft was therefore chosen to perform a delta Net Present Value (NPV) Analysis on in order to understand the potential financial benefit of employing autonomous RPO technology.

Baseline Cygnus Spacecraft

Initial cost to develop the Cygnus spacecraft was $300M, however, most of this cost, $288M, was recouped through Research and Development (R&D) contracts with NASA. The estimated price per mission in 2020 was $223M [7-10]. Using an profit margin of 20%, the estimated per unit cost is $178.4M. An NPV analysis as shown below was performed for a 10 year timeframe with a discount rate of 2% using two missions per year as has been historically seen for Cygnus ISS resupply missions. The total NPV for the baseline is $498M.

Cygnus NPV withoutRPO.png

Cygnus Spacecraft with Autonomous RPO

An NPV analysis was then performed for a Cygnus spacecraft with autonomous RPO capability. An estimated $50M in nonrecurring development costs would be required initially for this upgrade which would not be recouped from external R&D funding sources. This would also add an estimated $12M per unit cost to the Cygnus spacecraft, bringing the total per unit cost to $190M. However, Northrop Grumman could charge an estimated $250M then for the the upgraded Cygnus capsule. The NPV analysis shown below was performed for the same 10 year timeframe as the baseline with a discount rate of 2% using two missions per year. The total NPV for the Cygnus with autonomous RPO technology is $624M.

Cygnus NPV withRPO.png


Financial Benefits

The delta NPV between the baseline Cygnus spacecraft and the addition of autonomous RPO capability is positive $126M. This shows the financial benefit of implementing such technology. The current Cygnus design is also not conducive to some future commercial space station designs that do not include robotic arm technology. It is therefore in the best interest of the company to also utilize autonomous RPO technology in order to continue capturing market share.

R&D Portfolio

NASA DART

NASA’s Demonstration of Autonomous Rendezvous (DART) was one of the first demonstrator R&D projects aimed at proving technologies for fully autonomous rendezvous capability. The DART spacecraft was launched in 2005 from Vandenberg Air Force Base by a Pegasus launch vehicle. The project was started in 2001 as proposed by the Orbital Sciences Corporation and selected as a high-risk demonstration project by NASA. Proposed cost for the project was $47 million which would rise over the course of the mission to a total of $110 million [11]. The mission was composed of both the DART spacecraft and its target satellite, the Multiple Path Beyond Line of Sight Communication (MUBLCOM) satellite, a DARPA and Army sponsored spacecraft. The mission was split into four phases: Launch and Early Orbit, Rendezvous, Proximity Operations, Departure and Retirement. In the Launch and Early Orbit Phase, DART would be put in an initial parking orbit below the target satellite. It would then enter a phasing orbit to position it below and behind the target; this was intended to show that GPS receivers were accurate enough to place the spacecraft close enough together to begin Proximity Operations. In Proximity Operations, DART would get closer to that target and before close-range holds/inspection maneuvers. The DART spacecraft would then retire itself to a low orbit to deorbit in a short amount of time [11-16].

400px}NASA DART

Unfortunately, the DART demonstrator mission was a failure. During the Proximity Operations phase, DART used up too much propellant to maneuver due to incorrect navigation data. DART’s GPS receiver’s measured velocity was biased by 0.6 m/s and therefore caused the estimated and measured to differ enough that this triggered the autonomous software onboard to reset once every three minutes. This in turn caused the incorrect navigation which resulted in the firing of the thrusters too many times to correct course and depleted the propellant. Due to the navigation errors, the DART spacecraft also missed the hold for the switch to full use of the Advanced Video Guidance Sensor (AVGS) and continued on a course that resulted in it colliding with MUBLCOM. While the DART mission did fail, a number of lessons were learned from the endeavor. These were mostly in relation to lack of rigor in the Guidance, Navigation and Control (GNC) software development and testing process and recommendations for adequate documentation and simulations in order to implement fully autonomous RPO technology [11].

DARPA Orbital Express

DARPA Orbital Express

The Defense Advanced Research Projects Agency's (DARPA's) Orbital Express was a demonstration mission launched in 2007 which sought to validate autonomous RPO technology in relation to in-space servicing [1]. The Orbital Express mission consisted of two spacecraft including the Autonomous

Space Transfer and Robotic Orbiter (ASTRO) and the Next-generation Satellite/Commodity Spacecraft (NextSat/CSC). The mission objectives related to ISAM included hydrazine fuel transfer, battery replacement, and flight computer replacement. Unfortunately an anomaly in the onboard sensor computer caused the navigation system to reject new information resulting in poor relative position and attitude knowledge and requiring operator intervention. Orbital Express did perform autonomously portions of its tasking when given Authority to Proceed (ATP) by ground operators and demonstrated to the potential of in-space servicing capabilities.

Space Tugs & Servicers

Starfish Space Otter

There are a number of companies in the NewSpace economy that have emerged in recent years to provide in-space services to other spacecraft users. These include companies offering space tug spacecraft designed to attach to another spacecraft and carry it to a different orbit or disposal point, as well as companies offering spacecraft capable of refueling, repairing, or upgrading other spacecraft. Demonstrations of these technologies are currently in work, such as Starfish Space's Otter, Momentus' Vigoride, D-Orbit's ION, Astroscale's ELSA-d, Orbit Fab, and Space Logistics' MEV. Most of these are using conditional autonomous RPO designs with plans to move to more fully autonomous operations in the future as they scale.

Needed Future Missions

A number of R&D missions are still required in order to implement autonomous RPO technology aligned with the strategic drivers into the greater space ecosystem. To date, most spacecraft still operate in Level 3 - Conditional Autonomy with autonomous operations through rendezvous but most proximity and docking operations still human controlled or closely monitored. Another mission like NASA's DART should be planned to demonstrate Level 4 and 5 autonomy for RPO. This can first be done with a cooperative target. Then autonomous RPO at full autonomy can be shown with a passive/non-cooperative target. Future R&D projects should also align with the safety FOMs proposed to show safe and trusted performance of autonomous RPO technology. A demonstrator mission where two autonomous RPO are occurring at the same time should also be planned to ensure scalability of the capability.

Key Publications and Patents

Publications

Historically in the US, RPO has been completed manually by astronauts with the assistance of technology. In the earliest days, astronauts utilized line-of-sight guidance techniques to complete RPO maneuvers with radar ranging. This was studied in Edwin ‘Buzz’ Aldrin’s 1963 MIT Dissertation, “Line-of-Sight Guidance Techniques for Manned Orbital Rendezvous” [17]. His Dissertation explored the inertial rotation of line-of-sight through rendezvous trajectories with only angular motion tracking information of a target spacecraft known without ranging. Buzz applied the technique in simulation of the Gemini rendezvous mission as well. He also noted that the “important question” of autonomy “concerning the proper allocation of the human resources to either direct participation controlling or a mere monitoring role in the overall mission is as yet not completely settled.”

In “Navigating the Road to Autonomous Orbital Rendezvous” (2007), David Woffinden and David Geller of Utah State University explore the birth and progress of autonomous RPO [18]. It can be seen that essentially from the start, the US and Russian space programs took two different approaches to orbital rendezvous operations. The US focused on manned operations that reduced complexity and allowed for flexibility, but made each mission unique and required intensive training. The Russians, on the other hand, focused on more automated operations with astronauts in a monitoring and override role. This increased development time and cost initially, but standardized systems between missions and reduced recurring engineering work. The paper argues that the Russian’s focus on automated RPO was likely a consequence of the military’s influence in their space program and push for automatization in order to reduce redesign between manned and reconnaissance missions. The differences between national approaches are seen in the subsequent design and legacy of RPO systems as outlined by Woffinden and Geller. The paper also explores the idea that the autonomous RPO systems of the future must meet new demands that are now possible due to the development of technology and techniques across the past half century of space exploration and orbital rendezvous operations.

Patents

Patents were found through the US Patent and Trademark Office’s online Patent Public Search tool. A search was performed with combinations of key terms using the AND operator: satellite/spacecraft/space+rendezvous, satellite/spacecraft/space+autonomous/autonomy, satellite/spacecraft/space+proximity, satellite/spacecraft/space+docking. Results were categorized according to five areas: Satellite Autonomy, Satellite Navigation, Satellite Maneuvering, Rendezvous, and Docking/Capture. The CPC classification is 244 for Aeronautics and Astronautics, 701 for Vehicles, Navigation, and Relative Location, and 382 for Image Analysis.

From US Patent 5,951,609 “Method and System for Autonomous Spacecraft Control”

US Patent 5,951,609 “Method and System for Autonomous Spacecraft Control”, dated Sep. 14th, 1999 by Hanson et. al. of TRW Inc., outlines a system for autonomous spacecraft control by managing onboard systems, monitoring performance with optimization, and fault detection with adaptive fault recovery [19]. A proposed “mission manager module” is utilized to analyze incoming mission objective commands and verify resourcing. These mission objective commands are then translated by a “command processor” into lower level command sequences for the subsystems to perform.

From US Patent 5,734,736 “Autonomous Rendezvous and Docking System and Method Therefor”

US Patent 5,734,736 “Autonomous Rendezvous and Docking System and Method Therefor”, dated Mar. 31st, 1998 by Palmer et. al. of TRW Inc., characterizes a system for performing autonomous rendezvous and docking using reflective targets to determine relative position between a chaser and target spacecraft [20]. A reflective target is attached to the target spacecraft which reflects radiation to a sensor, receiving radiation of “a first in band wavelength” and illuminating the target with “a second out of band wavelength”. The sensor system can distinguish between the two and produce a difference image which can discriminate the reflective target position from spurious light based on known target “intensity, size, shape, and location”. This can then be utilized to produce a state vector of the target spacecraft relative to the chaser.

US Patent 2002/0035419 A1 “Autonomous Navigation, Guidance and Control using LDRI”, dated Mar. 21st, 2002 by Ching-Fang Lin, describes a process for docking and formation flight utilizing a Laser Dynamic Range Imager (LDRI) [21]. The proposed system eliminates the need for unique targets on spacecraft, “which are highly dependent on illumination and orientation.” The LDRI avoids the illumination problem by using a continuous wave laser radar. Range is found through the phase shift between incident and reflected laser beams coming from each pixel. The target’s motion can then be calculated using the light intensity and range images. The relative position and attitude error is then used to produce control commands for rendezvous. A similar system was used by the US Space Shuttle program.

From US Patent 2002/0035419 A1 “Autonomous Navigation, Guidance and Control using LDRI”

Technology Strategy Statement

Our target is to reach a fully autonomous system for satellite RPO that is safe and scalable. As stated in previous sections, the first step will be getting to Level 4-High Autonomation with autonomy throughout all mission phases and human control only required in emergency scenarios. This will first be shown with cooperative and then non-cooperative targets. Once this is safely and effectively demonstrated, then Level 5-Full Automation can be demonstrated and the system can be scaled.

RPO SwooshChart.png

References

[1] "Getting In Your Space: Learning from Past Rendezvous And Proximity Operations". The Aerospace Corporation. 2018. https://aerospace.org/sites/default/files/2018-05/GettingInYourSpace.pdf

[2] "Using Historical Practices to Develop Safety Standards for Cooperative On Orbit Rendezvous and Proximity Operations". International Astronautical Congress. 2018. https://www.isi.edu/sites/default/files/centers/serc/CONFERS_IAC_Paper_PUBLISH.PDF

[3] "INITIAL SAFETY POSTURE INVESTIGATIONS FOR EARTH REGIME RENDEZVOUS AND PROXIMITY OPERATIONS". International Association for the Advancement of Space Safety. 2019. https://www.isi.edu/sites/default/files/users/barnhart/INITIAL%20SAFETY%20POSTURE%20INVESTIGATIONS%20FOR%20EARTH%20REGIME%20RENDEZVOUS%20AND%20PROXIMITY%20OPERATIONS%20-%20IAASS%202019.pdf

[4] "Limits of Resolution: The Rayleigh Criterion". College Physics. 2016. https://pressbooks.online.ucf.edu/phy2053bc/chapter/limits-of-resolution-the-rayleigh-criterion/

[5] https://en.wikipedia.org/wiki/Commercial_Resupply_Services

[6] "NORTHROP GRUMMAN ANNOUNCES CYGNUS SPACECRAFT UPGRADES". The Launch Pad News. 2023. https://tlpnetwork.com/news/2023/08/northrop-grumman-announces-cygnus-spacecraft-upgrades

[7] "SpaceX price hikes will make ISS cargo missions more costly". engadget. 2018. https://www.engadget.com/2018-04-27-spacex-price-hikes-iss-resupply-costs.html

[8] "NASA will pay more for less ISS cargo under new commercial contracts". SpaceNews. 2018. https://spacenews.com/nasa-will-pay-more-for-less-iss-cargo-under-new-commercial-contracts/

[9] "Cygnus cargo vehicle gearing up for debut flight". Spaceflight Now. 2013. https://spaceflightnow.com/antares/cots1/130904frr/#:~:text=The%20development%20of%20the%20Cygnus,of%20Orbital's%20advanced%20programs%20group.

[10] "Discount History". White House. 2020. https://www.whitehouse.gov/wp-content/uploads/2020/12/discount-history.pdf

[11] "Overview of the DART Mishap Investigation Results". 2006. https://www.nasa.gov/wp-content/uploads/2015/01/148072main_dart_mishap_overview.pdf

[12] "Demonstration of Autonomous Rendezvous Technology (DART) Project Summary". SPIE's Space Systems Technology and Operations Conference. 2003. https://ntrs.nasa.gov/api/citations/20030062183/downloads/20030062183.pdf

[13] "DART". Gunter's Space Page. 2003. https://space.skyrocket.de/doc_sdat/dart.htm

[14] "DART (Demonstration for Autonomous Rendezvous Technology)". esa eoPortal. 2012. https://www.eoportal.org/satellite-missions/dart-rendezvous#dart-demonstration-for-autonomous-rendezvous-technology

[15] "Orbital's Dart Vehicle Arrives at Vandenberg Air Force Base for Prelaunch Integration and Testing". Northrop Grumman. 2004. https://news.northropgrumman.com/news/releases/orbital-s-dart-vehicle-arrives-at-vandenberg-air-force-base-for-prelaunch-integration-and-testing

[16] "Multiple path beyond-line-of-sight communications (MUBLCOM)". IEEE. 1998. https://ieeexplore.ieee.org/document/722540

[17] "Line-of-sight guidance techniques for manned orbital rendezvous". Aldrin, Buzz. MIT. 1963. https://dspace.mit.edu/handle/1721.1/12652

[18] "Navigating the Road to Autonomous Orbital Rendezvous" Woffinden, David; Geller, David. Utah State University. 2007. https://arc.aiaa.org/doi/pdf/10.2514/1.30734?casa_token=A5dxnyeh6v4AAAAA:5ad2z08Y35KCEuGKZj9tKGc_X_FqBx4EuofPcEHcaztVvbVrCP9G1A7x6Za06c3HW0XDaru59EFcOw

[19] "US Patent: Method and System for Autonomous Spacecraft Control". Hanson et al. TRW Inc. 1999. https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5951609

[20] "US Patent: Autonomous Rendezvous and Docking System and Method Therefor" Palmer et al. TRW Inc. 1998. https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5734736

[21] "US Patent: Autonomous Navigation, Guidance and Control using LDRI". Lin. https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/20020035419

[22] "The 6 Levels of Vehicle Autonomy Explained". synopsis. https://www.synopsys.com/automotive/autonomous-driving-levels.html