Difference between revisions of "In Space Propellant Depot"

From MIT Technology Roadmapping
Jump to navigation Jump to search
Line 8: Line 8:


==Design Structure Matrix==
==Design Structure Matrix==
[[File:DSMPropDepot.jpg|500px|DSM]]<br>
[[File:DSMPropDepot.jpg|600px|DSM]]<br>


==Object Process Diagram==
==Object Process Diagram==

Revision as of 19:26, 26 November 2019

Roadmap Overview

Propellant Depot picture Propellant Depot Concept <ref> Kutter,B.F., et al. (2011, September, 9-11) A Practical, Affordable Cryogenic Propellant Depot Based on ULA’s Flight Experience</ref>


In the late 1800s James Dewar became famous for his study in the liquefaction of gases such as hydrogen and oxygen. Current Cryogenic storage containers are referred to as dewars. In the 1959 both LOX and LH2 were used to propel the second and third stages of the Saturn rocket. In 1966 LH2 and LOX were chosen to power the Atlas-Centaur rocket. “As early as 1928, scientists studying interplanetary travel began arguing that pre-positioning propellants in orbit would be required for any sustainable large-scale travel beyond Earth.” <ref>Goff Ja et al. “Realistic Near-Term Propellant Depots: Implementation of a Critical Spacefaring Capability” p 2 </ref>. In 2007 Boeing addressed the value of creating propellant depots to increase the payload one could carry to future moon missions <ref> Benioff, D. (2007, October, 1-5) LEO Propellant depot: A commercial opportunity </ref>. This idea was also brought up to Masten space systems in 2008 <ref>Goff, J. et al.(2008) The Case for Orbital Propellant Depots </ref> In 2010 ULA (United Launch Alliance), began to develop ACES (Advanced Cryogenic Evolved Stage) which was a high-performance upper stage rocket with the ability to store and transfer propellant to later missions. ULA also was working on creating CRYOTE (Cryogenic Orbital Testbed) to demonstrate the feasibility of cryogenic fluid management in micro and zero gravity <ref> Gravlee, M., et al. (2011) Cryogenic Orbital Testbed (CRYOTE) Development Status </ref>. In 2018 Vice President Pence at the 34th Space Symposium outlined the plan to have NASA return to the moon with the eventual use of a space depot. <ref> Pence, M.R. (2018, April, 16) Remarks by Vice President Pence at the 34th Space Symposium | Colorado Springs, CO </ref>. To date though there has been no space tested propellant depot.

Design Structure Matrix

DSM

Object Process Diagram

Object Process Diagram
The above diagram shows the objects and processes required for an in-space propellant depot

In-Space Propellant Depot Technology Roadmap

2ISPD -In-space Propellant Depot
Technology Roadmap
The above technology roadmap shows the roadmap to an in-space propellant depot based on the dates provided by the ULA for the centaur V rocket which should contain a type of in space propellant depot

In-Space Propellant Depot Roadmap OPM

Road Map OPM

Figures of Merit

The FOMs are following: ● Boil Off Rate/ Normal Evaporation Rate (%kg/day)
● Maximum Capacity [m^3]
● Unit Cost [$]
● Cost per hour(operational and maintenance [$/hr]
● Cost to attain per weight [$/kg]

Figure of Merit Trends


The above graph shows data for the developed testbeds which did in fact reach Zero Boil-Off (Duration vs. Year). Albeit these are for different gases, the first two are LH2 and the second two are LN2 (simulating LOX). LH2 has to be stored below 20K and LOX needs to be stored below 90K. The methodology used for storage is the same (aside from the necessary temperature), so the progress in duration of sustained zero-boil-off is still relevant since the improvements for one could be used for the other. The dFOM/dt found is 24.4 hours ZBO/year. For this specific FOM the theoretical limit is likely close to inifite, but once long term ZBO is attained there would be other figures of merit which would have limits. For example, the power necessary to sustain ZBO would have a limit based on the amount of power which could be generated by the solar panels and the structure to support them. Similarly, the capacity of the tanks would have limits based on the structural limitations and the force of gravity of the depot.

Were the testing on each of these done for longer duration there would be significant boil-off <ref> Chai,P.R., et al. (2013, December, 16) Cryogenic thermal system analysis for orbital propellant depot</ref>. A better predictive metric would be the % boil-off per month, but none of these tests were performed for a month or more. The current state of the FOM is slowly increasing but is limited by the cooling capacity of the cryocoolers currently available. Were the Fuel used to be liquid methane instead of LH2, the completion of the development of a 150W 90K cryocooler by Creare (being funded by NASA) <ref> Platcha, D. (2017, July, 7) NASA cryocooler technology developments and goals to achieve zero boil-off and to liquefy cryogenic propellants for space exploration </ref> would allow ZBO for a propellant depot containing LOX [7]. Methane has a higher boiling point, so it would likely be able to sustain ZBO as well. Both SpaceX and Blue Origin plan on using Methane/LOX powered rockets, so this may well be a useful and attainable technology in the near future.

Alignment with "Company" Strategic Drivers: FOM Targets

Drivers.png

Positioning of Company vs. Competition : FOM charts

In order to better understand the current state of cryogenic storage a comparison was made between our theoretical system and some other systems. It seems fair to compare our system to at least one other theoretical space based system. For this we used the NASA system described in the road map. To determine the boil off, we used the first paper discussed in question 2 which calculated the boil off for a theoretical system using modern day cryocoolers. Since NASA would be using LH2 as a cryogen, and the cooling capacity wouldn’t have increased much from what was described in the paper (10W to 20W; 120W needed for ZBO), I believe that this is a fair estimate. The other two systems which were chosen were different sized LO2 storage tanks which are earth based. While the architecture of both is different the working principle is the same. Only the theoretical cost for the NASA system was readily available, in order to acquire the cost for the other two a quote would need to be requested.
Positioningg.png

Technical Mode: Morphological Matrix and Tradespace


One of the most important FOM for this system is the duration which it can sustain a cryogen. This is determined by how long the system can keep the boil off rate at zero. Patel, C. N. et al “Design of Low Heat Leak Liquid Helium Dewar” 2016 showed a simple method to model the performance of a dewar (cryogen storage container) along with actual values corresponding to the variables, which was challenging to find for commercially developed cryogenic storage tanks. Even though this paper is creating a helium dewar, the relationship between the variables is relevant for different cryogens. Since the cryogenic tank was insulated using MLI (multi layered insulation) the equation developed by lockheed martin to model the performance of MLI was used to model the heat leak through the body of the tank.
Mliheatleak.png

While most values were defined in the paper, some values (he (latent heat of vaporization) and ρ (density)) had to be acquired from outside sources (https://encyclopedia.airliquide.com/helium).

Cs 8.95E-08
Cr 5.39E-10
TH 300 K
Tc 4.5 K
Tm 152.25 K
N 20 layers/cm
NS 40 radiation shields
ε0 0.02
A 5.6194 m^2
he 20754 J/kg
D 1.06 m
L 1.06 m
V 1.126455762 m^3
ρ 125 kg/m^3
mtotal 140.807 kg

The boil off rate can be determined by multiplying the heat leak by the inner surface area of the container and the conversion faction 86400 (60s/min*60min/hr*24hrday) then dividing by the latent heat of vaporization and the total mass. Then multiplying by 100 gives the boil off rate. The resulting equation is
BoilOffrat.png


The variables which could be varied by design without changing the cryogen, are the area (A), MLI density (N), emissivity (ε0), and number of radiation shields (Ns). Are.png

Missivity.png

Mlidenesity.png

Radshield.png




Once the values were entered and the derivatives were normalized the values were plotted in the tornado chart below. From this it can be seen that increasing the density of the MLI (layers/cm) has the strongest effect per percentage on the boil off rate. Also while Volume (another one of our figures of merit) is not specifically defined in this equation, the area (A) is. It can be seen that increasing the area increases the BOR. Since the area is directly related to the volume (where area is dV/dr) it can be seen that the FOM of volume is in tension with the FOM of BOR.

BORderivativeNormalizedChart.png

This model could be improved by adding heat leak from different sources as well as adding in the negative heat leak from adding in a cryocooler. The equations to model these other sources could be determined from Platcha, D. M. “Passive ZBO storage of liquid hydrogen and liquid oxygen applied to space science mission concepts” 18 November 2005.

Per guidelines defined by <ref>Behrens, G. et al (1997 March) " Guidlines for the Design of Cryogenic Systems"</ref>, cylindrical dewars (cryogenic storage vessels) must be able to withstand 1 atm. The thickness of the walls of this dewar can be calculated using the equation
Pressureeq.png
where Pa is the ambient pressure of 15 psi (simplified to P in our equations
k is a correction factor based on the tank dimensions (49 for our dimensions)
E is the modulus of elasticity for the tank (2.77E7 psi for steel)
D is dewar outer diamter (104 inches used)
t is the wall thickness and (.37 inches used)
n is the factor of safety (value of 4 is used)
With this information the volume of the dewar can be calculated
Volume.png
From the equation for volume the partial derivatives of the variables can be calculated along with the sensitivities
NormE.png
Normn.png
NormT.png


NormGraphVol.png
From the graph it can be seen that the wall thickness has the strongest effect on volume. Changing the factor of safety doesn't have as strong of an effect, but increasing the factor of safety does decrease the volume. This graph does make it seem that Young's modulus has as strong an effect as the other variables, but changing the material could change Young's modulus by an order of magnitude, which may have a more significant effect.

Based on data available from NASA and from suppliers of earth based cryogen storage we were able to create a morphological matrix detailing some of the subsystems used on cryogenic storage devices. Based on the cryogen which is being stored, different equipment may be necessary. For example if a cryocooler was being used, LH2 would need one which operates at a colder temperature. Anytime that a cryocooler is used, power would be necessary. For both of the earth based systems which were found, cryocoolers were not used, so power was not needed. For systems in space, predicting the location of the liquid vs the gas can be complicated, to simplify this certain settling methods are used, while on earth based systems this isn’t necessary since the denser liquid settles to the bottom of the tank via gravity. Insulation is one of the more divisive topics within the matrix since each of the items can be further deconstructed. It does seem that earth based systems typically don’t use MLI or sun shield, while space based generally do.
Matrix.png

Keys Publications and Patents

<ref>Chai P. R. et al (16 December 2013) “Cryogenic thermal system analysis for orbital propellant depot” </ref>

The importance of this paper mainly lies in figure 14 and 15 on page 44 and table 5 on page 45. These figures show for LOX and LH2 the amount of boil off for different designs for different total mission durations. From these, the benefits of active cooling can be seen for storing cryogens. It also shows that there would be a significant benefit to achieving zero-boil off for the cryogen. Table 5 shows what the current cooling capacity is for state of the art cryocoolers, and what would be necessary to achieve zero boil off. While the cooling capacity in order to achieve zero boil off for oxygen is not too far from what the current state of the art is capable of (at the time of this paper), the cooling capacity for hydrogen ZBO is more than an order of magnitude greater than what we are currently capable of.

<ref>Platcha, D. et al “NASA cryocooler technology developments and goals to achieve zero boiloff and to liquefy cryogenic propellants for space exploration” 7 July 2017</ref>

This paper is one of the most recent papers available on the topic of in-space cryogenic storage depots. It covers the current status of cryocoolers and details the plans by NASA to develop two new cryocoolers. One of the cryocoolers is intended to move us closer to being able to store hydrogen with ZBO, while the other is for storing LOX. The cooler for LOX, per the previously mentioned paper would have the necessary cooling capacity to store LOX with zero boil-off. This paper also covers the different circulators available for circulating the cryocooler fluid over a large area to cool the entire cryogen tank.

<ref>US Patent 9488313 B2</ref>

This patent posits the use of aerogel, as opposed to vacuum to insulate the contents of a cryogenic storage tank. There are several good reasons for taking this approach. A vacuum needs to be maintained to have consistent insulation. Also vacuum requires both an inner and an outer shell. Two separate shells add weight to the system. Also the manufacture of vacuum storage can be difficult. The aerogel based insulation does not require repeated vacuuming. It can save up to 10kg in a 40 foot cryogen storage container and is not as difficult to manufacture. There is also the added benefit that the aerogel can contain fire preventive material. The benefits of Aerogel options are compared to MLI in Fesmire J.E. “Aerogel-Based Insulation Materials for Cryogenic Applications” 2018. The most valuable FOM for this subsystem is the thermal conductivity, which we are trying to minimize. Per the aforementioned paper, a combination of MLI and Aerogel is one of the more attractive options. This possible reduction in weight without significant increase in thermal conductivity may allow a comparably larger volume cryogenic storage tank.

<ref>Goff, Jonathan & Kutter, Bernard & Zegler, Frank & Marchetta, Jeffrey. (2009). Realistic Near-Term Propellant Depots: Implementation of a Critical Spacefaring Capability. 10.2514/6.2009-6756.</ref>

This paper details some of the options available for various critical subcomponents and the pros and cons of each. For example one of the important subsystems is that of the propellant settling, which keeps the separation between the liquid and gas phases to prevent multiphase flow into the docked spacecraft. The article shows what the current options are and even gives the TRL level for a few. It also details some of the different ways these subsystems have been integrated into theoretical and experimental systems. This article provides specific value for developing a morphological matrix for this technology.

Financial Model


In order to make financial model for our project, we assume that our business model, sales, manufacturing cost and R&D expenses are as the following.

Business model:
we hypothesize that our business model is mainly to produce cryogenic fuel storage tank in space, including fuel, and we sell them to customer. In addition, maintenance, which means monitoring of storage tank in space should be included. To simplify our business model, we ignore the launch business and disposal business at this model.

Sales:
According to the reference [1], we have information that customer such as NASA would buy cryogenic fuel for propellant $10,000 per kilogram. Based on this information and volume size of our developing storage tank, it is assumed that each tank of LO2 and LCH4 would be sold in the following price. LO2: 14m3 (16,000kg): $160,000,000 LCH4: 14m3(6,000kg): $60,000,000 As we draw the roadmap, Moon mission, Exploration of Mars and Space hotel, these big projects will be executed in 2023, 2025, 2026. We believe that each project will highly require both LO2 cryogenic storage tank and LCH4.

R&D expenses:
According to the reference [2], we know that the R&D cost of cryogenic fluid management by NASA is $200 million. Hence, we hypothesize that our R&D cost will be costed approximately $200 million. Our R&D project will be planed from 2020 to 2023, thereby we hypotheses that $50 million per year will be required at least.

Manufacturing cost:
Based on the information of reference [3], in order to produce our storage tank, the manufacture process such as impact extrusion, spin forming end and tap neck, wet winding and forth. The reference shows that approximately $ 6 million ($5.96 million) is required in total. This data includes both facility cost and labor cost. Therefore, our developed storage tank cost $ 6 million at least. In addition, the data do not include other components, solar panel, cryocooler and pipes. We have to add those cost and integration of those component and the tank to evaluate cost. We assume that those cost are the followings: Solar panel; $1 million Cryocooler: $1 million Pipes: $ 1 million Integration: $1 million From the mentioned above, we infer that the total cost of manufacturing our cryogenic fuel storage tank is approximately $ 10 million.

Launch Cost:
W assume that it costs $ 100 million to launch one storage tank. We know that the launch cost has decreased by technology development, but we take it conservative.

Financial Model:
Based on the above information, business model, sales, R&D expenses and manufacturing cost, we assume the financial model of our project is the Figure.1. Therefore, NPV is calculated by the equation (17-2) in the textbook and the result become NPV = $110 million.
Financial Model

Fig.1: The NVP of our project from 2020 to 2030

References:
<ref>The Space Review, October 24, 2011, Propellant depots: the fiscally responsible and feasible alternative to SLS. http://www.thespacereview.com/article/1955/1</ref> <ref>Jonathan R. Stephens, NASA MSFC and Wesley L. Johnson, NASA GRC, in 2017. “Cryogenic Fluid Management, Technology Development Roadmap”</ref> <ref>2017, DOE Hydrogen and Fuel Cells Program Review, Hydrogen Storage Cost Analysis Page 7.</ref>


List of R&T Projects and Prototypes


MLIhistory.png
Multi Layered Insulation is the primary method to prevent radiative heat from entering into the cryogenic storage tank. The emissivity level is the amount of energy which is given off by an energized material. For our system, energy is radiated from the sun (and reflected from the earth). When it contacts our system, we would like to minimize the energy which makes it through to the cryogenic tank. Traditionally Dacron, or some other fiber netting is placed as a spacer between the layers of film to reduce conductive heat between the layers.<ref>Miyakita,T. et al, (2015 July 16)"Evaluation of Thermal Insulation Performance of a New Multi-Layer Insulation with Non-Interlayer-Contact Spacer" </ref>showed that by changing to a new form of spacer a much lower emittance can be attained. The new form of spacer, rather than a netting, are hard interlocking spacers that only contact the film in a very small surface area.
CryocoolerHistory.png



The NASA funded project to create a 150W cryocooler capable of 90 kelvin cooling is very important for the implementation of an orbital propellant depot, since it will allow any of the heat which makes it through the MLI to be removed. Previous cryocoolers had a significantly lower cooling capacity and efficiency. The recently funded cooler has shown promise and is a key component in orbital propellant depots going forward.
CryogentankHistory.png
Storage tanks for cryogens are large pressure vessels which are extremely well insulated against incoming heat. On earth volume less constrained and the main limiting factor is the allowable pressure for a specific pressure vessel design. For objects being sent to space, one of the most critical constraints is the weight. For that reason, even though many cryogenic storage tanks on earth are made out of stainless steel, storage tanks used on space vehicles have traditionally been made out of aluminum due to the lower density. Recent development by NASA and <ref>Md.,S.I. et al (2015 Oct 9) "Investigation of woven composites as potential cryogenic tank materials"</ref>, has shown that carbon fiber can be an effective storage tank for cryogens. So for the same weight of a tank made out of stainless steel, the volume of a tank made of Aluminum would be larger, and the volume of a tank made of carbon fiber would be even larger.
BORVol.png
When looking at the two FOMs of Boil-Off%/day and Volume, a clear difference can be seen. The boil-off rate is significantly higher without the cryocooler project and the new MLI. For the same given mass the volume of a tank using a carbon fiber has significantly larger volume than one using aluminum.
BORCost.png
While there hasn’t been a mass limit which was set specifically, the value of having a lighter tank which is able to meet the same volume requirement shows its value when looking at another one of our FOMs,cost to attain. When using the spaceX target of $1000/lb, and the mass of the tank, the cost to launch the tank can be determined. From this it can be seen that the use of the carbon fiber tank saves over 50 million dollars, while also having significantly less boil off per day.

Technology Strategy Statement


Our target is to develop an orbital propellant depot for methalox (methane and liquid oxygen) that becomes functional by 2022. To achieve a useful duration of 1000 days and a volume of 14 meters cubed we will invest in three research and development projects. The first is a cryocooler capable of over 150 watts cooling at 90 kelvin. The second is a multi-layer insulation that uses hard separators as opposed to a netting. The third is a composite, carbon fiber, storage tank for the cryogens used. These are enabling technologies that should allow us to reach our 2022 technical and business targets