Smart 3D Cameras

Work in Progress

Technology Roadmap Sections and Deliverables

The Smart 3D Camera roadmap is a level 2 roadmap as it enables the level 1 roadmaps for autonomous navigation of robots, drones and cars.

• 2S3DC - Smart 3D Camera

Roadmap Overview

Smart 3D Cameras use a pair of identical optical imaging sensors and IR projectors (in certain use-cases) to capture stereo images of the environment. These images are then processed to calculate the disparity and then extract depth information for all pixels. In addition to the depth map, the scene is segmented to extract objects of interest and to identify them using training neural nets. Note that this roadmap will focus on passive stereo vision cameras that DO NOT use structured light.

Design Structure Matrix (DSM) Allocation

The 2S3DCAM roadmap is part of the larger company effort to develop an autonomous navigation stack as it enables 1ANAV.

Roadmap Model using OPM

Figures of Merit

Figure of Merit	Units	Description
Million Disparity Estimations Per Second (MDE/s) (10^6)	pxHz	Comparison metric defined as: MDE/s = Image resolution * disparities * frame rate
Power Consumption	Watts (W)	Power consumed by the entire stereo camera and image processing pipeline to produce a depth map
Image resolution	Pixel (px)	Number of pixels in the captured image
Range (m)	m	The maximum sensing distance
Accuracy (m)	m	The measuring confidence in the depth data point
Frame rate (fps or Hz)	fps or Hz	The scanning frame rate of the entire system
Depth Pixels (px)	px	The number of data points in the generated depth map
Cost ($)	$	The commercial price for a customer, at volume
Energy Consumed per Depth Pixel, E_dpx	W/pxHz	The total power consumed by the sensing and processing pipeline divided by the Million Disparity Estimations per Second

Alignment with Company Strategic Drivers

#	Strategic Driver	Alignment and Targets
1	To develop a compact, high performance and low-power smart 3D camera that can detect objects in both indoors and outdoor environments	The 2S3DCAM roadmap will target the development of a passive stereo camera with onboard computing that has a sensing range of >20m, sensing speed of >30fps at an energy cost lower than 1mW/px in a 15cm x 5cm x 5cm footprint.
2	To enable autonomous classification and identification of relevant objects in the scene	The 2S3DCAM roadmap will enable the capability for AI neural nets to run onboard the camera to perform image classification and recognition actions.

Positioning of Company vs. Competition

Technical Model

Financial Model

Assignment 4

List of R&T Projects and Prototypes

Assignment 4

Key Publications, Presentations and Patents

Patents

• Dawson et al. Neuromorphic Digital Focal Plane Array. US Pat Pending. US20180278868A1

This patent claims new techniques for creating imaging sensors that leverage the principle of neuromorphism to embed pixel processing directly onto the sensor. For a Smart 3D camera this presents a disruptive option for two FOMs - reduce power consumption and increased frame rate.

• Bobda et al. Reconfigurable 3D Pixel-Parallel Neuromorphic Architecture for Smart Image Sensor. Pending. US20190325250A1

This patent also leverages neuromorphism but instead of only tracking pixel changes, it also embeds processing elements into different regions of the image sensor. With this technology, it will be feasible to embed intelligent processing of shapes and features close to the image capture system. By leveraging image sensor embedded processing, a magnitude improvement in power efficiency and performance can be achieved.

Publications

• Michalik et al. Real time smart stereo camera based on FPGA-SoC. 2017. IEEE-RAS

This work presents a realtime smart stereo camera system implementation resembling the full stereo processing pipeline in a single FPGA device. The paper introduces a novel memory optimized stereo processing algorithm ”Sparse Retina Census Correlation” (SRCC) that embodies a combination of two well established window based stereo matching approaches. The presented smart camera solution has demonstrated real-time stereo processing of 1280×720 pixel depth images with 256 disparities on a Zynq XC7Z030 FPGA device at 60fps. This approach is ~3x faster than the nearest competitor.

• Andrepoulos et al. A Low Power, High Throughput, Fully Event-Based Stereo System. 2018 IEEE CVF

This paper uses neuromorphic event-based hardware to implement stereo vision. This is the first time that an end-to-end stereo pipeline from image acquisition and rectification, multi-scale spatiotemporal stereo correspondence, winner-take-all, to disparity regularization is implemented fully on event-based hardware. Using a cluster of TrueNorth neurosynaptic processors, the authors demonstrates their ability to process bilateral event-based inputs streamed live by Dynamic Vision Sensors (DVS), at up to 2,000 disparity maps per second, producing high fidelity disparities which are in turn used to reconstruct, at low power, the depth of events produced from rapidly changing scenes. They consume ~200x lesser power at 0.058mW/pixel!

• Shin et al. An 1.92mW Feature Reuse Engine based on inter-frame similarity for low-power object recognition in video frames. 2014 IEEE

This paper proposes a Feature Reuse Engine (FReE) to achieve low-power object recognition in video frames. Unlike previous works, proposed FReE reuses 58% of features from previous frame with inter-frame similarity. Power consumption of object recognition processor is reduced by 31% with the proposed FReE which consumes only 1.92mW in a 130nm CMOS technology. This has potential for reducing power consumption for smart stereo cameras.

Technology Strategy Statement

Assignment 4 or 5