Difference between revisions of "Orbital Launch Vehicles Roadmap"

From MIT Technology Roadmapping
Jump to navigation Jump to search
Line 116: Line 116:


== Keys Publications and Patents ==
== Keys Publications and Patents ==


=== Patents ==  
=== Patents ==  

Revision as of 20:26, 7 November 2019

Roadmap Overview

Orbital launch vehicles (LV) are internally propelled vehicles used to carry payloads from Earth’s surface to Earth orbit or beyond. They are powered by rocket engines that generate large amounts of thrust even in vacuum by means of expelling hot gas through a nozzle. The propellants burnt to generate that gas can be liquid or solid (or hybrids) and are stored inside the LV. Most launch vehicles are divided into stages to discard non-used structure and some of them are reusable.

This roadmap will be an L1 roadmap from the point of view of the LVs as a technology that enables the Human race to transport cargo from the surface of the Earth to outer space.

As an example, an Ariane 5 LV is typically used to insert up to 2 geostationary satellites into a GTO per launch. Its launch mass is about 777 metric tons and has a LEO capacity of about 20 tons and a GTO capacity of about 10 tons.

Ariane 5 Schematic

On a typical flight, the different stages of the OLV such as the first stage, the solid rocket boosters, and interstages will be jettisoned to reduce the mass of the vehicle until the payloads are precisely deployed at the desired orbit.

Ariane 5 typical flight profile

DSM Allocation

The following DSM shows the relationship of the Launch Vehicles roadmap to other high or lower level roadmaps.

1LV DSM.png

The following tree structure can be also extracted from it:

  • 1LV Launch vehicles
    • 2RE Rocket engines
      • 3PROP Propellants
      • 3NOZ Nozzles
      • 3CC Combustion chambers
      • 3PUMPS Pumps
      • 3TVC Thrust vectoring
    • 2GNC Guidance, Navigation and control
      • 3ATTI Attitude determination
      • 3CONT Attitude control
      • 3GUID Guidance
    • 2STRUCT Structures
    • 2COMMS Telecommunications
  • 1GS Ground Stations

Roadmap model using OPM

The following Object Process Diagram describes the Orbital Launch Vehicle technology point of view for this roadmap. The main object of the diagram is the different launch vehicles, its decomposition into main components/subsystems like propulsion system, structures, tanks, avionics, payload adapters, and the main attributes. Finally, the processes in the lifecycle are described as the integration of the payloads and the actual launch.

Orbital launch vehicles OPD

Figures of merit

The table below shows a list of FOMs by which Orbital Launch Vehicles can be assessed.

Figure of Merit Units Description
Payload to LEO [Kg/Year] Payload mass that can be put into a 500 Km circular low earth orbit for a specific launch vehicle every year. This takes into account the production rate of the rockets and, if applicable, the reusability.
Payload to mass Ratio [Kg/Kg] Mass capacity to LEO over total LVs mass (including the payload).
Reliability [non-dimensional] Successful launches over total launches.

Cost per Kg as a FOM wasn't considered in this roadmap because of the difficulty of obtaining accurate data.

Physical principles

In order to put a payload in orbit, an OLV needs to accelerate to a certain velocity in a certain direction at a specific altitude from the center of the Earth. This requirement can be derived from Newton’s Universal Gravitational Law and can be approximated for circular orbits as:

Where G is the universal gravitational constant, M the mass of the Earth and r the distance to the center of the planet of the orbit. So for example, a 500km circular orbit around the Earth will require a velocity of approximately 7.61 km/s or 27405 Km/h. A few more km/s are usually needed to account for atmospheric losses and other non-idealities.

In other to achieve that velocity, OLV uses rockets engines that use a combination of fuel and oxidizers (known as propellants) to create a high-pressure gas that is then accelerated by a converging-diverging nozzle to create thrust.

<math>\Delta v = v_\text{e} \ln \frac{m_0}{m_f} = I_\text{sp} g_0 \ln \frac{m_0}{m_f}</math>

Where ΔV is the change of velocity of the vehicle, m0 is the initial total mass, including propellant, also known as wet mass, mf is the final total mass without propellant, also known as dry mass, ve is the exhaust velocity and is equal to Isp times g0. Here, Isp is the specific impulse in the dimension of time and is a measure of effectively the rocket use the propellant and g0is standard gravity. In other words, this equation relates the total amount of velocity change that a rocket engine can create on a system by means of the initial and final mass (loss of mass of propellant), the efficiency. When multiple stages are present this equation must be considered for each stage.

So, as ΔV is known, then choosing a propulsion system will define the Isp and this will lead to the ratio of the initial and final mass necessary or which is equivalent to the amount of mass for structure tanks and engines, payload and propellant that is needed.

For example, this table shows some figures of merit of different rocket engines.

OLV Propellant % of total mass Payload % of total mass
Saturn V 85 4
Space Shuttle 85 1
Soyuz 91 2

In conclusion, the only FOM that is directly related to a physical principle is the Payload to mass Ratio described above.

Payload to mass Ratio [Kg/Kg]

Useful payload to orbit is driven by the Rocket Equation and then affected by the different efficiency factors and non-idealities of the real Launch Vehicles designed and implementation. The trend in the payload to mass ratio is illustrated in the following plot using historical database <ref>McDowell's JSR Database (Links not working)</ref> since 1957. Only those LVs which has successfully achieved orbit at least once and carrying more than 10 Kg of payload were considered. A trend towards bigger LVs and more efficient can be observed.

Mass vs Payload plot

Caveat: the LEO capacity figure is an approximation and is not normalized to a specific orbit across LVs. A substantial difference might be present if the stated LEO capacity was calculated for a 600 KM SSO orbit instead of a 400 Km equatorial orbit.

The evolution over time of this FOM can be seen in the following plot. In this case, only those LV that are better than the previous ones is plotted. LV Performance over time.png

Payload to LEO [Kg/Year]

Payload to LEO can be used to estimate the capacity of the total launchers to put payload in orbit. In this case, two different sub-FOMs where calculated. First, the actual mass launched by aggregating all the masses of all the satellites on every launch per year. This doesn't include the payload adapters and dispensers used for the launch. On the other hand, the potential capacity is the sum of the total LEO capacity for each vehicle aggregated every year. As a reference, the ISS is about 419 tons and the James Webb Space Telescope is approximately 6.2 tons.

Actual and potential mass per year

Reliability

The reliability of LVs has increased significantly during the first 10 years after 1957 reaching levels of above 90% overall. Later years the increment is not that significant and for example, in 2018 the 98.24% of all the launches were successful. This trend and the totals can be seen in the following plot:

Launches and reliability per year

Alignment with “Company”3 Strategic Drivers: FOM Targets

Positioning of Company vs. Competition: FOM charts

Technical Model: Morphological Matrix and Tradespace

Keys Publications and Patents

= Patents

The following patents are those I found interesting from a disruptive point of view. Each of them addresses a different technology that can somehow replace the launch vehicles by performing the same final outcome which is putting payload into orbit but using completely different approaches.

Orbital mechanics of impulsive launch

Inventor: Cartland; Harry E, Assignee: QUICKLAUNCH, INC. United States patent 10,427,804 Date: October 1 2019

This patent is about methods to launch into orbit a spacecraft using an impulsive launch. In this case, the spacecraft is initially accelerated in a direction due east from the Earth by a high energy launch system then traveling through the atmosphere until an apogee. The patent claims different methods to further accelerate an impulse launched spacecraft in order to achieve an LEO or a trans planetary trajectory or a way to rendezvous with an orbiting spacecraft.

Space elevator

Inventor: Quine; Brendan Mark, Assignee: THOTH TECHNOLOGY INC. United States patent 9,085,897 Date: August 28, 2008

This patent is about an inflatable space elevator tower that can be used to deliver payloads or to install equipment to Earth Orbit. In this case, the core of the tower is constructed by cylindrical inflatable cells with gyroscopic stabilization mechanisms along with it. A pod at the top of the tower allows launching satellites using a kick stage or similar.

The US patent 6,491,258 granted to Lockheed Martin Corporation has a similar concept.

Sea landing of space launch vehicles and associated systems and methods

Inventor: Bezos; Jeffrey P. Assignee: Blue Origin LLC United States patent 8,678,321 Date: March 25, 2014

The first claim is a perfect description of what is being patented here: “ A method for operating a space launch vehicle, the method comprising: launching the space launch vehicle from earth in a nose-first orientation, wherein launching the space launch vehicle includes igniting one or more rocket engines on the space launch vehicle; reorienting the space launch vehicle to a tail-first orientation after launch; positioning a landing structure in a body of water; and vertically landing the space launch vehicle on the landing structure in the body of water in the tail-first orientation while providing thrust from at least one of the one or more rocket engines.”

What is very interesting is that this patent was filed by Blue Origin in 2010 and SpaceX sue them. The trial judgment granted spaceX petition and the patent was cancelled. This is the resolution of the United States Patent Office. This means that now, anyone is free to attempt to land a rocket on a boat.